Hi, I've installed CRM 2011 - on W2K8; the web site is working fine; I can connect from LAN.

Now on a W7 client I try to install the Outlook connector.

As the server url I entered: http://myserver:5555 and I click on "Test Connection" button; the form is populated with the correct user, organization and display name but when I click on "Ok" button I receive the following error:

There is a problem communicating with the Microsoft Dynamics CRM server. The server might be unavailable. Try again later. If the problem persists, contact your system administrator.

The IIS CRM site has the anonymous authentication enabled and I can access from the client the following url without problems:http://crmserver:5555/XRMServices/2011/Discovery.svc

Below is the log file:

20:18:18|  20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ConfigInfo.RemoveOrphanDatastoreIfNeeded
20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ConfigInfo.ConfigInfo
20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.MainForm.MainForm
20:18:19|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.MainForm.MainForm_Shown
20:18:19|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.MainForm.AddServer
20:18:19|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.ServerForm
20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.ServerForm
20:18:19|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.SetUIData
20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.LoadAvailableUrls
20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.LoadAvailableUrls
20:18:19|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.SetUIData
20:18:25|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm._testConnectionButton_Click
20:18:25|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm.TestConnection
20:18:25|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm.TestConnection
20:18:25|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm._testConnectionButton_Click
20:18:26|  Info| Fill organization comboBox with server information.
20:18:27|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ServerForm._okButton_Click
20:18:27|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ServerForm._okButton_Click
20:18:27| Error| Exception : The provided uri did not return any Service Endpoints!  at Microsoft.Xrm.Sdk.ClientExceptionHelper.Assert(Boolean condition, String message)
  at Microsoft.Xrm.Sdk.Client.ServiceConfiguration`1..ctor(Uri serviceUri)
  at Microsoft.Xrm.Sdk.Client.OrganizationServiceConfiguration..ctor(Uri serviceUri)
  at Microsoft.Xrm.Sdk.Client.ServiceConfigurationFactory.CreateConfiguration[TService](Uri serviceUri)
  at Microsoft.Crm.Outlook.ClientAuth.ClientAuthProvidersFactory`1.GetAuthProvider(Uri endPoint, Credential credentials, AuthUIMode uiMode, Uri webEndPoint, IClientOrganizationContext context, Form parentWindow)
  at Microsoft.Crm.Application.Outlook.Config.ServerInfo.LoadUserId()
  at Microsoft.Crm.Application.Outlook.Config.ServerInfo.Initialize(Uri discoveryUri, OrganizationDetail selectedOrg, String displayName, Boolean isPrimary)
  at Microsoft.Crm.Application.Outlook.Config.ServerForm.LoadDataToServerInfo()
  at Microsoft.Crm.Application.Outlook.Config.ServerForm.<InitializeBackgroundWorkers>b__2(Object sender, DoWorkEventArgs e)
  at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
  at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
20:18:30|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.MainForm.AddServer
20:18:30|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.MainForm.MainForm_Shown
20:18:31|Verbose| Method entry: Microsoft.Crm.Application.Outlook.Config.ClientConfig.Terminate
20:18:31|  Info| Exit code: Default
20:18:31|Verbose| Method exit: Microsoft.Crm.Application.Outlook.Config.ClientConfig.Terminate
20:18:31|  Info| === Microsoft Dynamics CRM for Outlook Configuration Wizard logging stopped: 4/6/2011 8:18:31 PM ===

Any ideas ?

Thank you,

Daniel

Hi Experts,

I am using CRM 2011 On Premise. I included an Entity and a Security Role in my solution on Dev Environment. I exported as a Managed solution to import it onto TEST Org. I cannot delete managed entity as expected but I can delete managed security role from TEST org. Is it a correct behaviour? I have System Administrator role assigned to me.

Thanks in advance.

Hello,

I migrated crm 2011 from crm 4.0. Plug-ins from crm 4.0 are working on crm 2011 well. I read that sdk of crm 4.0 is unsupported on crm 2013. Do i need to registered plug-ins rewrited for crm 2013 in crm 2011 before upgrade?

or i can upgrade crm 2013 from crm 2011 and update plug-ins later (which are writing with sdk of crm 4.0)?

Thanks

Regards

Hi Expert,

            Today, we are facing with this problem. They cannot login to the CRM. So that i checked the event viever. Error message is shown

Current active key (KeyType : CrmWRPCTokenKey) is expired.  This can indicate that a key is not being regenerated properly.  Current Active Key : CrmKey(xxxxxxxxxxxxxxxxxxxxxxxxxx, ScaleGroupId:00000000-0000-0000-0000-000000000000, KeyType:CrmWRPCTokenKey, Expired:True, ValidOn:07/22/2011 10:08:21, ExpiresOn:08/24/2011 10:08:21, CreatedOn:07/22/2011 10:08:21, CreatedBy:NT AUTHORITY\NETWORK SERVICE.  Key Setting :

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

         So that i found the solution http://www.mohamedibrahim.net/blog/2009/06/18/ms-crm-key-generator-error-invalid-action-microsoft-crm-4-error/ and http://social.microsoft.com/Forums/en/crmdeployment/thread/9c25603a-e21b-4d69-9680-f20b5e407a12

          When i check "Microsoft CRM Asynchronous Processing Service"the it is stoped. We can use after the start the service. Good Luck for me :D

What is my question?

         Can anyone tell me, why do we got this error? Is it actually expiry or bug? If it expiry, do we need to renew license? We are using EE version and 5 Organization.

Kindly, advise to me.

Best Regards,

Yukon

Hi,

I've been reading the planning and deployment guides for service providers, but I'm still a bit confused about how customers actually would access CRM. Let's say you have a SP that host both CRM and Exchange and has 2 types of customers.

Customer A has his own mail solution. Can he install the Outlook client, if they have Exchange , on their computers to access CRM? How do the users log in to the CRM?

I assume users at customer A  can use the web client also using a URL like this: https://customerA.crm.serviceprovider.com

Customer B has an Exchange account with the SP. If he has access to Outlook, using Citrix, I assume he can use the Outlook client?

Can he use Outlook Anywhere with the Outlook client using RPC over HTTP?

Is the Outlook client available in Outlook Web Access?

A fall back would always be the web client using https://customerB.crm.serviceprovider.com.

For both customers I assume that the e-mail router should be used? (as this is recommended in the docs...)

Hi All,

We are creating opportunity on click of custom button in lead using plugin. 

 var qualifyIntoAccountContactReq = new QualifyLeadRequest
                        {
                            CreateAccount = true,
                            CreateOpportunity = true,
                            CreateContact = true,
                            LeadId = new EntityReference("lead", entity.Id),
                        };

Getting bellow error while doing so

Unhandled Exception: System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: An error occurred in the Plugin.System.ServiceModel.FaultException`1[Microsoft.Xrm.Sdk.OrganizationServiceFault]: An unexpected error occurred. (Fault Detail is equal to Microsoft.Xrm.Sdk.OrganizationServiceFault).Detail: 
<OrganizationServiceFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/xrm/2011/Contracts">
  <ErrorCode>-2147220891</ErrorCode>
  <ErrorDetails xmlns:d2p1="http://schemas.datacontract.org/2004/07/System.Collections.Generic">
    <KeyValuePairOfstringanyType>
      <d2p1:key>OperationStatus</d2p1:key>
      <d2p1:value xmlns:d4p1="http://www.w3.org/2001/XMLSchema" i:type="d4p1:string">0</d2p1:value>
    </KeyValuePairOfstringanyType>
    <KeyValuePairOfstringanyType>
      <d2p1:key>SubErrorCode</d2p1:key>
      <d2p1:value xmlns:d4p1="http://www.w3.org/2001/XMLSchema" i:type="d4p1:string">-2146233088</d2p1:value>
    </KeyValuePairOfstringanyType>
  </ErrorDetails>
  <Message>An error occurred in the Plugin.System.ServiceModel.FaultException`1[Microsoft.Xrm.Sdk.OrganizationServiceFault]: An unexpected error occurred. (Fault Detail is equal to Microsoft.Xrm.Sdk.OrganizationServiceFault).</Message>
  <Timestamp>2015-09-30T04:33:14.5886888Z</Timestamp>
  <InnerFault i:nil="true" />
  <TraceText>
[LeadQualify:LeadQualify.qualifyLead]
[9c0eb808-f765-e511-80cd-a95511b30fc0:LeadQualify.qualifyLead: Update of lead]
</TraceText>
</OrganizationServiceFault>

Can any one suggest me to resolve this issue. 

Thanks.

We are doing a fresh install of CRM2015 on a (VM) windows server 2012 R2 with SQL 2012 SP1.

The installation seemed to work all the way up until it gets to the part where it's trying to create the organization; The installation throw an error regarding an opportunity revenue rule workflow.

The error log:

19:09:07|Verbose| Business process control with id {919E14D1-6489-4852-ABD0-A63A6ECAAC5D} and name Lead to Opportunity Sales Process was successfully imported.
19:09:07|  Error| System.Exception: Error.ActionFailed Microsoft.Crm.Tools.Admin.ImportDefaultDataAction ---> Microsoft.Crm.CrmException: Error while importing workflow {8b12a2c7-088c-49aa-93b3-b618e2b26ea4} name Opportunity Revenue Rule ---> Microsoft.Crm.CrmException: Error generating UiData ---> System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.ReadEvaluateCondition(EvaluateCondition activity)
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.ReadExpression(Collection`1 activities, Type endActivityType, Boolean customActivity, Int32& activityIndex)
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.ReadBranchStep(StepBase parentStep, Collection`1 sequenceActivities, Int32& activityIndex)
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.ReadConditionStep(Boolean wait, ConditionSequence sequence)
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.ReadCompositeStep(String stepId, String description, Activity activity, Collection`1 variables)
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.ReadSingleStep(Activity activity)
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.GenerateWorkflowObjectModelFromXaml()
   --- End of inner exception stack trace ---
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.GenerateWorkflowObjectModelFromXaml()
   at Microsoft.Crm.Workflow.ObjectModel.UIDataGenerator.GenerateUIData()
   at Microsoft.Crm.ObjectModel.Workflow.Validations.ValidateNoConditionScopeForPblRule.Validate(EntityValidationContext validationContext, BusinessEntity entity)
   at Microsoft.Crm.ObjectModel.Validations.EntityValidator.Validate(EntityValidationContext validationContext)
   at Microsoft.Crm.ObjectModel.BusinessRuleServiceInternalHandler`1.Create(IBusinessEntity entity, ExecutionContext context)
   at Microsoft.Crm.Tools.ImportExportPublish.ImportBusinessRuleSubHandler.ImportRule()
   at Microsoft.Crm.Tools.ImportExportPublish.ImportBusinessRuleSubHandler.ImportItem()
   at Microsoft.Crm.Tools.ImportExportPublish.ImportWorkflowHandler.ImportItem()
   --- End of inner exception stack trace ---
   at Microsoft.Crm.Tools.ImportExportPublish.ImportWorkflowHandler.ImportItem()
   at Microsoft.Crm.Tools.ImportExportPublish.ImportHandler.Import()
   at Microsoft.Crm.Tools.ImportExportPublish.RootImportHandler.RunImport()
   at Microsoft.Crm.Setup.Server.Utility.NewOrgUtility.OrganizationImportDefaultData(Guid organizationId, Version existingDatabaseVersion, XmlDocument importXmlDoc, Boolean setup, String importFilePath)
   at Microsoft.Crm.Setup.Server.Utility.NewOrgUtility.OrganizationImportDefaultData(Guid organizationId, Version existingDatabaseVersion, String importFile)
   at Microsoft.Crm.Tools.Admin.ImportDefaultDataAction.Do(IDictionary parameters)
   at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
   --- End of inner exception stack trace ---, Error, RetryCancel, Option1

Any tips to resolve this issue in installation is much appreciated. Thanks

Eric UNG [Senior Analyst Programmer :: Sydney, Australia]

Hi,

 I'm configuring ADFS with CRM 2015 for claims based authentication, following this blog post:

http://www.interactivewebs.com/blog/index.php/crm/how-to-set-up-crm-2015-ifd-on-windows-2012-and-adfs-3-0/

My setup is slightly different as I have:

- CRM web server (CRM configured to run from port 444)
- SQL Server
- 2 x ADFS servers load balanced with NLB and WID

I've followed the blog post, used a wild card public SSL cert and configured the SPN to use a service account (rather than server name as the blog mentions)

I have 2 issues:

1 . When internal users browse to https://internalcrm.contoso.com:444/ they're prompted for a username and password before getting Dynamics access. How can I configure this for SSO?

2. When I try to access the "external" URL (which points back at my same CRM server), https://authcrm.contoso.com:444/
I get a 404 Page cannot be found after the user is authenticated. 

There are no errors in the event logs. *.contoso.com is in the trusted sites section of the IE.

Thanks in advanced

Hi all,

I'm currently migrating from CRM 2011 to CRM 2015. But because it's not possible to directly migrate an organization from CRM 2011 to CRM 2015 I tried to install CRM 2013.

I first ran the installation on a Windows Server 2012 R2 Standard with a SQL 2012 all on the same server. During installation of the new default organization I ran into this error:

Action Microsoft.Crm.Tools.Admin.SetTokenKeyAction failed. Name translation: Generic processing error. (Exception from HRESULT: 0x80072115)

 I tried googling the error to determine whether I could ignore this or that I had to fix this. I couldn't find anything about this error so I tried to ignore the message and continue the installation. I figured I didn't need the organization anyway. A few steps later the installation ran into some other problems, at that point I could only abort the installation.

The installation seemed successful, I could open the deployment administrator and I could see the failed organization. I removed it and tried to install the report extensions so I could import the organization I want to migrate. During installation of the report extensions I ran into this error during system check:

Name translation: Generic processing error. (Exception from HRESULT: 0x80072115)

I was not able to resolve the error so I tried reinstalling CRM, this resulted in the same errors. After this I tried reinstalling the entire server, this time I set it up with Server 2008 R2 and SQL 2008, this also resulted in the same errors. In both cases SSRS was working, I could access it and add folders and reports. I tried giving the involved service users administrator privileges, this didn't work either.

At this point I tried everything I can think of, is there anyone who ran into the same problems and knows a way to resolve them? Or is there anyone who knows of a different way to migrate an organization from CRM 2011 to CRM 2015?

Hi,

   I have installed CRM 2013 in Full Server Roles with separate SQL Server. Now I would like to configure IFD . So I have placed 2 different servers(NLB) in DMZ with Front end server & Deployment Manager Role(by connecting with same DB) installed. Now I have 1 Full Server, 1 DB Server and 2 FE server in DMZ. I would like to configure IFD in front end server Deployment Manager. But I would like to configure this without disturbing the current Internal CRM users accessing the CRM. How to  configure this IFD in FE without having any impact on the current internal CRM Users?

Hi,

    I have configured IFD in CRM 2013 based on Orgname.domain.com. But now the client want to change the name to crm.domain.com. How to change/Redirect the CRM IFD URL ?  

  1 Option is to take the backup of existing orgname DB and creating new org name as crm and restore the orgname db. Then transferring the solutions and creating sub DNS for the name 'CRM'. 

  Any other options for this to change or redirect the CRM URL?

 If I just create a DNS in the name of 'CRM' same like orgname. Will it works for crm.domain.com ?

Thanks 

Hi All,

As Subject, how to get url from images that attached in annotation?

thanks.

I copied all error from event log, Who can help me analyze this errors

I have installed all software acccoding to the guidline on MS Server 2012, and MS CRM 2015 is installed successfully on my server without any errors. When I open the web site, I always get the following errors. Anyone can help, many thanks.

Event code: 3005 
Event message: An unhandled exception has occurred. 
Event time: 11/19/2015 4:36:05 PM 
Event time (UTC): 11/20/2015 12:36:05 AM 
Event ID: 30bae07516fb431f895e2e258cbb08c5 
Event sequence: 15 
Event occurrence: 6 
Event detail code: 0 

Application information: 
    Application domain: /LM/W3SVC/2/ROOT-1-130924522761782119 
    Trust level: Full 
    Application Virtual Path: / 
    Application Path: C:\Program Files\Microsoft Dynamics CRM\CRMWeb\ 
    Machine name: CRMSVR 

Process information: 
    Process ID: 3316 
    Process name: w3wp.exe 
    Account name: NT AUTHORITY\NETWORK SERVICE 

Exception information: 
    Exception type: CrmException 
    Exception message: Request not supported: RetrieveMultiple
   at Microsoft.Crm.Application.Platform.ServiceCommands.PlatformCommand.XrmExecuteInternal()
   at Microsoft.Crm.Application.Platform.ServiceCommands.RetrieveMultipleCommand.Execute()
   at Microsoft.Crm.Application.Caching.CustomResourceLoader.GetCustomResources(IOrganizationContext context, Int32 cacheKey)
   at Microsoft.Crm.Application.Caching.CustomResourceLoader.LoadCacheData(Int32 key, IOrganizationContext context)
   at Microsoft.Crm.Caching.CrmMultiOrgCacheBase`2.LookupEntry(TKey key, IOrganizationContext context)
   at Microsoft.Crm.Application.ResourceManager.CustomResourceManager.TryGetCultureString(String name, CultureInfo culture, Boolean getSystemString, IOrganizationContext context)
   at Microsoft.Crm.Application.ResourceManager.CustomResourceManager.TryGetCultureString(String name, CultureInfo culture, IOrganizationContext context)
   at Microsoft.Crm.Application.ResourceManager.BasicResourceManager.GetCultureString(String name, CultureInfo culture, IOrganizationContext context)
   at Microsoft.Crm.Controls.Header..ctor(Boolean isControlHeader)
   at Microsoft.Crm.Controls.BasicHeader..ctor()
   at Microsoft.Crm.Application.Controls.AppHeader..ctor()
   at ASP.default_aspx.__BuildControlcrmHeader()
   at ASP.default_aspx.__BuildControlTree(default_aspx __ctrl)
   at ASP.default_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)



Request information: 
    Request URL: http://localhost:5555/default.aspx 
    Request path: /default.aspx 
    User host address: ::1 
    User: MTSR\crm 
    Is authenticated: True 
    Authentication Type: Negotiate 
    Thread account name: NT AUTHORITY\NETWORK SERVICE 

Thread information: 
    Thread ID: 14 
    Thread account name: NT AUTHORITY\NETWORK SERVICE 
    Is impersonating: True 
    Stack trace:    at Microsoft.Crm.Application.Platform.ServiceCommands.PlatformCommand.XrmExecuteInternal()
   at Microsoft.Crm.Application.Platform.ServiceCommands.RetrieveMultipleCommand.Execute()
   at Microsoft.Crm.Application.Caching.CustomResourceLoader.GetCustomResources(IOrganizationContext context, Int32 cacheKey)
   at Microsoft.Crm.Application.Caching.CustomResourceLoader.LoadCacheData(Int32 key, IOrganizationContext context)
   at Microsoft.Crm.Caching.CrmMultiOrgCacheBase`2.LookupEntry(TKey key, IOrganizationContext context)
   at Microsoft.Crm.Application.ResourceManager.CustomResourceManager.TryGetCultureString(String name, CultureInfo culture, Boolean getSystemString, IOrganizationContext context)
   at Microsoft.Crm.Application.ResourceManager.CustomResourceManager.TryGetCultureString(String name, CultureInfo culture, IOrganizationContext context)
   at Microsoft.Crm.Application.ResourceManager.BasicResourceManager.GetCultureString(String name, CultureInfo culture, IOrganizationContext context)
   at Microsoft.Crm.Controls.Header..ctor(Boolean isControlHeader)
   at Microsoft.Crm.Controls.BasicHeader..ctor()
   at Microsoft.Crm.Application.Controls.AppHeader..ctor()
   at ASP.default_aspx.__BuildControlcrmHeader()
   at ASP.default_aspx.__BuildControlTree(default_aspx __ctrl)
   at ASP.default_aspx.FrameworkInitialize()
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)


Custom event details: 




Monitoring test failed: Test Title: Help Content Server Tests.: Machine: CRMSVR: ServerRole: HelpServer
Test Log:
The remote server returned an error: (404) Not Found.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Crm.Monitoring.WebHelpers.GetWebResponse(String webpage, Boolean setCrmAuth, Boolean useProxy, Byte[] postData, Boolean setUserAgent, Int64 dmzPort)
   at Microsoft.Crm.Monitoring.WebHelpers.GetWebResponse(String webpage, Boolean setCrmAuth, Boolean useProxy, Byte[] postData, Boolean setUserAgent)
   at Microsoft.Crm.Monitoring.Tests.HelpContent.VerifyHelpContent.TestDefaultHelp(TestResult result)
   at Microsoft.Crm.Monitoring.Tests.HelpContent.VerifyHelpContent.Execute()
   at Microsoft.Crm.Monitoring.Engine.MonitoringRuntime.ExecuteMonitoringTest(MonitoringTestBase test, Int32 attempts)

InnerException Type:System.Net.WebException
.



Query execution time of 50.3 seconds exceeded the threshold of 10 seconds. Thread: 3; Database: Axisoft_MSCRM; Server:192.168.6.222; Query: select x.*, 'typename' = at.Description, 'isquoted' = at.Quoted, CONVERT(bigint, x.VersionNumber) AS TimeStamp from AttributeView x join AttributeTypes at on (x.AttributeTypeId = at.AttributeTypeId) order by x.EntityId, x.ColumnNumber.

Hello Guys,

i am trying to configure email router. But if i am using Http in CRM, it will not allow me to enter credentials  in mailbox settings. But if i use https then in email router settings gives below error.

vikas gupta

Hello guys,

I was trying to configure CRM 2015 Email Router. I configured it successful. i received an email of successfully creation of given ID. but when i am trying to send email through workflow getting below message "This Message has not been submitted for delivery. Kindly advise about this error.

vikas gupta

Hi there,

I'm having a real problem trying to get CRM 2011 installed and operational.  On a new machine, I've logged in as a Domain Admin and have run the installation wizard and pointed to a new SQL Server where there are no existing CRM databases.  Essentially, I always get the same error of "Global catalog not found in forest".  I've tried this both in the installation wizard as well as trying to create a new organisation via Deployment Manager.  I've tried various ipconfig /flushdns and /registerdns but without any luck.  The service accounts are domain accounts and I've been able to use SETSPN via command window (using Windows Server 2008 R2) and it is able to talk to AD to list any SPNs associated, so I know the server can definitely see the AD and also the installation wizard let me navigate the OUs to get to the place where security groups are meant to be.  I've also checked to see if there is stale data in the AD.

As far as I can tell AD is OK and perfectly visible from the CRM installation server.  Yet, this is the error that is reported every time:

17:25:22|  Error| Installer Complete: OrganizationCreator - Error encountered
17:25:22|  Error| Exception occured during Microsoft.Crm.Tools.Admin.OrganizationCreator: Action Microsoft.Crm.Tools.Admin.ProvisionBusinessAction failed.
InnerException:
Microsoft.Crm.CrmSecurityException: Could not find GUID for server ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: Global catalog not found in forest "mycompany.local".
   at System.DirectoryServices.ActiveDirectory.GlobalCatalog.FindOneInternal(DirectoryContext context, String forestName, String siteName, LocatorOptions flag)
   at Microsoft.Crm.SecurityUtils.GetGuidFromServerName(String serverName)
   --- End of inner exception stack trace ---

Can anyone offer any suggestions as to how I can further troubleshoot this?  Is there some sort of test I can run that represents what ProvisionBusinessAction is attempting to do?

Many thanks

Hello Team,

We have implemented auto number functionality through plugin in custom entity. Logic is working perfectly when a single request triggers to server. If multiple requests are reaching server on the same time, same auto number is setting with all the requests. Can expect any resolution on the same.

Regards,

Kumar R

I'm trying to install CRM 2016 onto a new server, and upgrade an existing CRM 2015 organization in the process.

I'm getting this error during the System Checks step of CRM Setup: "The encryption certificate '(certificate here)' cannot be accessed by the CRM service account."

I have no idea what that means since I see no security settings that I can configure in the Certificates interface.

This is running on Windows Server 2012 R2 with SQL Server 2014 Standard. I took the organization database and the MSCRM_CONFIG database from the old server and restored them onto this server so I could upgrade those databases during this installation. I also installed the certificate from the old server to the certificate store on this new computer.